Purready 5081 - UV Resistant Polyurethane Liquid Coating | Невидимые и цветные гидроизоляционные жидкости

It is a single-component, polyurethane-based waterproofing and coating material with high ultraviolet stability. It is ready-to-use in liquid form, and it is suitable to foot traffic .

Usage Areas

It can be safely used for waterproofing and damp-proofing purposes on materials such as concrete, stone, etemit, and
metal; in gutters, channels and ducts, terrace roofs; for protecting polyurethane foam applications; in water tanks,cold stores, damp environments, and swimming pools.

Advantages

• It has very high adherence. It offers perfect adherence even on aged coatings.
• It is highly resistant to diluted acids, bases, salt, chemicals, mildew and weather conditions. As a very durable material
it maintains its original characteristics for years.
• As a single-component, easy-to-apply, elastic material it does not does creep in vertical surfaces. It can cover capillary cracks.
• Because it is produced from UV-resistant resins it is resistant to sunlight. It is stable against depolymerization.
• It can be applied individually, or as a protective coat onto double-component polyurethane materials.
• Because it is an ever elastic material, no cracks occur on the surfaces it is applied.
• Its solid component ratio is high.
• It is resistant to plant roots.
• After having cured, it is suitable to walk on.

Technical Specification

Color : Gray/White/Special
Basis : Modified Polyurethane
Thermal Resistance : Between -35°C and +110°C
Viscosity : 3000 (at 25°C)
Solid Ratio : 86%
Application Temperature : Between 5°C and 35°C
Density : 1.4 gr/cm3
Pull Out Adherence : 9.19 Kgf/cm2
Slipping Adherence : 75.06 Kgf/cm2
Hardness : 65 Shore A
Elongation at Break : at 20°C % 600
Wear Resistance : 354 mg (TS EN ISO 5401-1)
Carbondioxide Permeability : 29,59 m (TS EN 1062-6)
Water Vapor Permeability : 2,810 m (TS EN ISO 7783:2011)
Water Permeability : 0,004 kg/m2.h0,5 (TS EN 1062-3)
Impact Resistance : ≥10Nm (CLASS II) (TS EN ISO 6272-1)
Bond Strenght By Pull-Off : 2,0 N/mm3 (TS EN 1542)

Application

• After having mixed thoroughly, it must be applied at least in two coats.
• It is recommended to wait for approximately 12 hours before applying the next coat. It is strictly recommended to
wear gloves during application.
• It can be applied very easily by using a brush, roller or sprayer.
• The curing period is 5 days.

Consumption

Packaging

5 kg Metallic pail - 80 Pieces / Pallet
25 kg Metallic pail - 33 Pieces / Pallet

It must be applied at least in two coats with 2 kg/m2 total consumption.

Description