Приложения
Гидроизоляция террасных крыш (без пешеходного движения и теплоизоляции)
| Waterproofing Terrace Roofs (without Foot Traffic and Thermal Insulation) |
|
Scrape off any loose concrete particles. Sweep the surface thoroughly and remove all the dust, dirt and residues. Prime the whole surface with Emilkote and leave to dry for at least 4-5 hours (Figure 1). Fill the large cracks with Emulderz Joint Filling Paste (Figure 2). Any hollows can be levelled by using Elastokote 2K. Rubberized Emulzer CSP can be applied when Emilkote is completely dry. During the application of Emulzer CSP 50gr/m² geo-textile felt or fiber glass is laid with 10 cm overlap at seams, and pressed (Figure 3). These materials prevent the cracks which may form on the concrete or alum in time from being transmitted to the insulation layer. Apply 2 or 3 more coats of Emulzer CSP, allowing each coat to dry up completely before the next coat is applied. Because bituminous products are not resistant to UV rays, ALUTEC reflective paint must be applied as the top coat. In this way, sunlight will be reflected, providing a more durable insulation as well as a more aesthetic look. It will also provide a cooler atmosphere in hot weather. Any damage can be repaired by using Emulzer CSP and felt. |
