Permo Flow Süper 3200 Super Plasticizer for Concrete | Бетонные и минометные добавки

Permo Flow Super is a super plasticizer ensuring an effective fluidity in concrete production and retardation in setting in hot climate conditions. It also decreases the ratio of water to acquire a high final strength. Due to this decreased water/cement ratio, the waterproof characteristic of the concrete is improved.

Usage Areas

• Floor, foundation and field concrete
• Curtains, girders and columns
• Reinforced concrete elements with thin and thick reinforcement
• All types of engineering buildings
• Ready-mixed concrete production and/or production at site, in summer, to be able to transport for a longer period of time.

Advantages

Its super plasticizing characteristic;
• Improves fluidity significantly without increasing the ratio of water and with no risk of segregation.
• Decreases segregation in concrete.
• Ensures consistency protection for a long period of time.
• Increases the concrete strength at 7 days and concrete strength at 28 days.
• Improves the appearance of the surface .
• Simplifies the placement of the concrete, decreases vibration, and reduces labour.
By decreasing the ratio of water significantly;
• It also improves final strength greatly.
• It decreases shrinkage and creeping.
• With lower water/cement ratios, provides lower insulation.

Application

At Concrete-Mixing Plants:

In the production of ready-mixed concrete, it is added to concrete mixing water found in the mixer. For best results, it is preferably better to feed water simultaneously with the additive. Concrete mixer should run at high speed for 3 minutes.

At Construction Sites:
The additive dosed as required is poured into the concrete found in the mixer. Concrete mixer should run at high speed for 5 minutes. Concrete prepared with mixing water should not be fed with extra water. Each 10 litres of extra water added leads to a decrease of 10 kgf/cm2 in the the pressure strength of concrete.

Consumption

The amount of the product to be used should be 0,8% to 1,5% of the weight of the cement. That is 0,800 to 1,500 kg for 100 kg of cement. Optimum dose depends on the quality of the binder and aggragate, the water/binder ratio and the ambient temperature.
So it is recommended to determine the optimum dose by trying different mixtures and testing them beforehand.

Packaging

Net: 30 kg Plastic drum