Невидимые и цветные гидроизоляционные жидкости \ İzo Balkon 5033 - Invisible Transparent Repellent

Ürün Teknik Dökümanları

Description
İzo Balkon is an undercoat repellent providing excellent water-repellent effect by impregnating the surface and forming an invisible water barrier
in capillaries.
 
Usage Areas
It is used for temporary waterproofing of the balconies and terraces which are not insulated yet, but already coated with ceramic, faience, etc. This application does not cause any damage for these coatings.
It provides water-repellent effect in the joints of non-porous building elements such as ceramic, faience, glass tile, glass mosaic (BTB), etc.
It is used as a surface protector for porous, dust and stain sensible coating materials such as cotto and clinker and it is applied before filling the joints.
It is used on all types of concrete surfaces, mineral plasters, highly absorbant surfaces such as gas concrete, bricks, roof tiles, terracotta, travertine, and on monuments and statues constructed with these materials.
It can be used to protect these surfaces (around pools, balconies, terraces) from the stains which may be caused by mortar.
Advantages
It is an invisible material.
It is an excellent material to protect the appearance of the surfaces.
Thanks to fast water-repellent effect, it provides self-washing surfaces.
It is highly absorbant.
It is ready-to-use in liquid form.
It dries solid without causing stickiness.
It does not form any film on the surface.
Its water vapor permeability provides breathability for the surface.
It protects the surface from mold, meldew, fungus and moss formation by avoiding moisture that would be an excellent environment for microorganism reproduction.
It avoids salt efflorescence.
It is resistant to alkali environments.
It provides heat economy by protecting walls from wetting. (5% humidity results in a loss of 30% in thermal insulation value of that material).
Its water-repellent effect protects building elements from any damage which may be caused by expansion due to freeze and thaw cycles.
It is non-explosive and inflammable.
It causes no toxic and ecological damage.
It has excellent UV-resistance.
Application
Izobalkon should be mixed thoroughly prior to application. It must be applied with saturation technique, coat after coat, without waiting for the former coat to dry up.
It must be applied at least in two coats. It is recommended to wait 24 hours before applying any coating material onto Izobalkon.
Prior to any application into joints of non-porous building materials such as ceramic, faience, glass brick, glass tile, etc., the joints must be repaired and filled.
Izobalkon is applied into joints in wet coats by using a thin tipped brush or rake.
After the application, any material smeared onto bright surfaces must be wiped off with a damp cloth.
Otherwise, these surfaces will become slippery. Izobalkon is not approved to be used on painted surfaces, under pressure water (pool, water tank, etc.), or in underground conditions with high hydrostatic pressure.
 
Consumption
Depending on the absorption of the surface 200-700 g/m2 for two coats
 
Packaging
1 kg Plastic bottle
408 Bottles / Pallet
 

 

Ürün Teknik Dökümanları