Dilatation Tapes | Дополнительные продукты

It is an elastomer reinforced dilatation tape that is used in the insulation of building dilatations, seams of different construction materials, and large cracks. It is resistant to UV light and external weather conditions, tearing and piercing. The product's elasticity is durable, and it is suitable for use on potable water tanks due to its constant water resistance. Moreover it is resistant to the penetration of plant roots and easy to repair in case of damage.

Areas of Use

Vertical and horizontal expansion joints
Joints of construction materials with different elasticity coefficients.
Insulation of large cracks.

Surface Preparation

The application surface must be cleaned of substances that would prevent adherence such as dust, oil, paint, curing material, detergent, mold oil, cement foam and silicon.
After sweeping the surface with a hard broom or wire brush, the dust must be cleaned from the surface by using a soft broom or a vacuum cleaner.

Appliacation

The width of the band must be larger than the width of the dilatation. After the dilatation tape is secured on both surfaces, an excess that would allow giving an omega shape is left.
EMULZER PU MASTIC is applied on both sides of the dilatation. The holes on the dilatation tape are compressed on the surface in a manner to lie on top of the assembly mastic and it is ensured that some mastic is released from these holes.
There must be no air bubbles left in between. Finally, mastic is applied on top of the tape as well as the sides to cover all of its holes.
It is joined lengthwise with an overlay of 20 cm by using a heat source or a special adhesive. Open flame or epoxy assembly mixture is not used for this process.
The tape must not be moved until the epoxy adhesive has hardened.

Packaging

25 meter / Roll
Width: 25-35-50 cm

Ürün Teknik Dökümanları

Teknik Bülten

Ürün Föyü